What it does
THE Light Dancer responds to the RHYTHM, FREQUENCY and VOLUME of music with RED, YELLOW, GREEN, and BLUE LED lights. The LEDs have been programmed to spread lighting response evenly throughout the Christmas tree in response to sound.
RHYTHM
If the music has a bouncy, quick rhythm the lights will respond with a quick movement. If the music has slower, smooth rhythm the lights will respond with delayed, extended movement and decay effect.
FREQUENCY
BASS - Red color, (Low frequency response)
TENOR – Yellow color, (Medium-low frequency response)
ALTO – Green color, (Medium- high frequency response)
SOPRANO- Blue color, (High frequency response)
VOLUME
Loud musical passages or notes will appear bright with a slow fade or diminish to dim.
MUSIC SOURCE
THELightdancer allows connection from any mobile devise using Bluetooth. You pair your mobile device to THELightDancer just like any Bluetooth speaker. Any source of music you can play on your cell phone will activate THELightDancer once it has been paired.
The music selections and speaker volume are controlled by your CELL PHONE volume control. There may also be a volume control on your selected speaker. Once you pair your mobile device to THELightdancer, you can stream any audio from your phone to THELightdancer unit.
It works just like a Bluetooth speaker with the addition of the dynamic responsive lighting display. THELightdancer also has a Line-in mode that allows music to be provided from any audio source via a 3.5 mm standard stereo audio connection such as a pre-amplifier, a home stereo, or an audio mixer board. The Line-in mode makes the unit an ideal choice for DJ’s who want to incorporate dynamic lighting displays onto their hardware repertoire.
Stringing a Tree
There are 3 LED light reel packages in the basic LightDancer kit. Each reel has 100 LED lights. Three reels of LED light beads are recommended for a 7’ to 9’ tree, 6 reels for a 12’ tree. Additional reels may be purchased for larger trees. The LED light beads are white until they are stimulated with music. The LED Light cords are clear and are undetectable in the tree once your decorations are completed. The LED light beads will have a red, or yellow, or green or blue color when stimulated with sound. Each LED bead is individually programmed to perform their individual color when stimulated. (For holidays other than Christmas see the owner's manual.)
It is suggested to start at the top of the tree with an open MALE connector at the top. The FEMALE connector at the other end will connect to the MALE end of the next string. It is suggested to string one reel at a time. Connect the male end of the next reel to the female end of the sting just completed. Work the light strings in toward the trunk and back out. It is recommended to continue the in and out process to add visual depth of the lights in the tree. Spacing of 1’ to 2’ is suggested between rounds as you string down the tree. It may be necessary to adjust the spacing slightly up or down as you string toward the bottom of the tree.
Seeking Distributors
We are currently seeking distribution partners. If you would like to speak with us about becoming a distributor, please contact Gary Smith at 256-910-2118, email us at info@daystar-tech.com, or complete the form below.
We look forward to hearing from you!
If you would like to contact us for further information,
please complete this inquiry form.